• 92 Vote(s) - 2.98 Average


[NEW] Extreme Injector 3.6.1 - How to use it properly [Tutorial]
finally found a good injector lel
Reply

[quote = "VisualBasics 'pid =' 8 'dateline =' 1421084396 ']
NOUVELLE VERSION 3.6.1 LIBÉRÉ


Ce tutoriel vous montre comment utiliser l'Extreme Injector 3.6.1 par master131 correctement!
Il est toujours important d'utiliser l'injecteur Extreme car il a des méthodes d'injection de sécurité les plus avancées autour. Tout d'abord, dans le menu principal d'injection, nous cliquez sur Paramètres. [ img] http://i.imgur.com/drjOcB8.png [/ img] Le menu Réglages devrait ressembler à ceci: [img] http://i.imgur.com/8DbWjPq.png [/ img] Vous pouvez cliquer sur "Démarrer en mode sécurisé" pour éviter les systèmes Anti Cheat pour détecter l'injecteur lui-même. Ce qui est différent en mode sécurisé? - nom aléatoire. - titre de la fenêtre au hasard. -. aléatoire Hash Quand il est ouvert, fermez l'injecteur normal. Cliquez sur Paramètres nouveau et maintenant nous arrivons à la partie où je vous montre quelles options doivent être activés. Toutes les options importantes sont signalées en gras. Mais d'abord, voici les explications de toutes les fonctions de sécurité. Les méthodes d'injection: - Standard: Ceci est la technique d'injection utilisé dans presque chaque injecteur là-bas. Il utilise CreateRemoteThread et LoadLibrary et est la technique d'injection les plus fiables. - LdrLoadDll Stub: Ceci est similaire à la technique d'injection standard, sauf qu'il va 1 niveau plus profond dans LoadLibrary. - LdrpLoadDll Stub: Cela va même un autre niveau plus profond dans LdrLoadDll. Il peut bloquer ou d'entraîner des erreurs sur les systèmes d'exploitation plus récents que Windows 8.1 car il peut changer. - Détournement de Discussion: Cette méthode est assez stable d'injection qui prend le relais code déjà l'exécution d'injecter votre DLL et ne sont pas utilisés par de nombreux injecteurs. - Manuel Carte : Cette technique est la plus sûre d'injection. Donc sûr que même Windows ne sera pas même connaître la DLL injectée. Il peut ne pas fonctionner correctement sur les systèmes d'exploitation plus récents que Windows 8.1, vous serez informé que faire par l'injecteur dans ce cas. Cela signifie, nous choisissons la méthode Plan d'injection manuelle. En outre, cliquez sur Avancé et sélectionnez fils de se cacher de débogueur. Détournement de fil ne fonctionne pas sur XP 64 bits. Maintenant, les options de brouillage. Scrambling Options: - Aucun:. Comme son nom l'indique, cela signifie que DLL de brouillage est complètement désactivé - de base: Cela vaut base de brouillage qui devrait fonctionner avec la plupart des DLL. - Standard: Cela vaut encore plus d'options de brouillage qui devrait fonctionner avec la plupart des DLL. - Extreme:. applique toutes les options de brouillage (le meilleur prédéfinis / forte) qui pourraient casser certaines DLL mais devrait fonctionner avec la plupart Cela signifie, nous sélectionnons le procédé de brouillage Extreme . . Si l'extrême brouillage ne fonctionne pas ou le jeu plante, utilisez la méthode standard Scrambling Maintenant nous arrivons à les options d'injection. Les options d'injection: - Auto Inject pourrait être gênant, je ne l'utilise jamais. - Fermer le Inject doit être marqué comme il ferme après l'injection, ce qui évite que les systèmes anti cheat ne pas détecté l'injecteur. - Furtif Inject est très important et doit être marqué comme lui donne encore plus de sécurité pendant l'injection. Cela signifie, nous sélectionnons sur Fermer injecter et furtif Injecter Injection . Méthodes. Maintenant, les méthodes post-injection après l'injection-Méthode: Ces techniques de post-Inject sont souvent vus dans les hacks pour essayer d'empêcher la détection de l'anti-triche, mais cet injecteur peuvent le faire à l'extérieur si le hack ne le fait pas déjà. - Effacer PE:. Ceci efface les têtes PE au début de la DLL injectée, ce qui rend difficile pour les anti-cheats pour identifier qu'une DLL existe à un endroit précis - Masquer Module: Ce cache la DLL du processus «liste des modules si un anti-cheat devait chercher dans une liste processus de module ', il ne semble pas. Attention: les plus modernes anti-triche ces jours peuvent toujours détecter facilement DLL même avec ces options activées. La méthode la plus sûre serait en utilisant la carte manuel. Cela signifie, nous sélectionnons Erase PE et se cacher Module comme méthodes post-injection. Vous devriez également lire la page d'avertissement. Après tout cela, cliquez sur OK, puis Injecter. Amusez-piratage avec la sécurité! Voici une photo comment il devrait ressembler à: [img] http://i.imgur.com/tY244Gn.png [/ img] Quoi de neuf dans la version 3.6? - Carte support manuel fixe pour Windows 8.1 (pour de vrai cette fois) - Mise à jour du fichier hôte pour C ++ dépendances visuels - Ajouté dépendance plus agressif résoudre des DLL Microsoft (fixe SystemFunction036 dans advapi32.dll) VirusScan: Téléchargement:





































































[/citation]
Reply

Tranks Man i need this
Reply

(01-12-2015, 07:39 PM)VisualBasics Wrote:
NEW VERSION 3.6.1 RELEASED


This Tutorial shows you how to use the Extreme Injector 3.6.1 by master131 properly!
It's always important to use the Extreme Injector because it has the most advanced security Injection methods around.

First off, in the Main Injection menu, we click Settings.
[Image: drjOcB8.png]

The Settings Menu should look like this:
[Image: 8DbWjPq.png]

You can click "Start in Secure Mode" to avoid Anti Cheat systems to detect the Injector itself.
What is different in secure mode?
- Random name.
- Random window title.
- Random Hash.

When it is open, close the normal injector.
Click Settings again and now we come to the part where i show you what options should be enabled.
All Important Options are marked in Bold.
But first, here are the explanations of all Security Features.

Injection Methods:
- Standard: This is the injection technique used in nearly every injector out there. It uses CreateRemoteThread and LoadLibrary and is the most reliable injection technique.
- LdrLoadDll Stub: This is similar to the Standard injection technique except it goes 1 level deeper into LoadLibrary.
- LdrpLoadDll Stub: This goes even another level deeper into LdrLoadDll. It may crash or cause errors on OSes newer than Windows 8.1 as it can change.
- Thread Hijacking: This is a pretty stable method of injection that takes over already executing code to inject your DLL and is not used by many injectors.
- Manual Map: This is the most secure injection technique. So secure that even Windows won't even know about the injected DLL. It may not work properly on OSes newer than Windows 8.1, you will be told what to do by the injector in that case.

That means, we select the Manual Map Injection Method. Also, click Advanced and select hide threads from debugger. Thread Hijacking doesn't work on XP 64 bit.
Now the Scrambling Options.

Scrambling Options:
- None: As the name implies, this means that DLL scrambling is disabled completely.
- Basic: This applies basic scrambling that should work with most DLLs.
- Standard: This applies even more scrambling options that should work with most DLLs.
- Extreme: Applies all scrambling options (the best/strongest preset) that could break some DLLs but should work with most.

That means, we select the Extreme Scrambling Method. If the extreme scrambling doesn't work or the game crashes, use the Standard Scrambling Method.
Now we come to the Injection Options.

Injection Options:
- Auto Inject could be annoying, i never use it.
- Close on Inject should be marked as it closes after Injection, this avoids that Anti cheat systems don't detected the Injector.
- Stealth Inject is very important and should be marked as it gives even more security while injecting.

That means, we select Close on Inject and Stealth Inject as Injection Methods.
Now the Post-Injection Methods.

Post-Injection Method:
These post-inject techniques are often seen within hacks to try prevent detection from anti-cheats but this injector can do it externally if the hack doesn't do it already.

- Erase PE: This erases the PE headers at the start of the injected DLL, making it hard for anti-cheats to identify that a DLL exists at a specific location.
- Hide Module: This hides the DLL from the process' module list so if an anti-cheat were to search through a process' module list, it would not appear.


Warning: Most modern anti-cheats these days can still easily detect DLLs even with these options enabled. The most secure method would be using manual map.

That means, we select Erase PE and Hide Module as Post-Injection Methods. You should also read the Info and Warning.
After all that, click OK and then Inject. Have fun hacking with security!

Here's a picture how it should look like:
[Image: tY244Gn.png]

Whats new in 3.6?
- Fixed manual map support for Windows 8.1 (for real this time)
- Updated file host for Visual C++ dependencies
- Added more aggressive dependency resolving of Microsoft DLLs (fixes SystemFunction036 in advapi32.dll)

VirusScan:


Download:


Seems legit
Reply

downloading injector
Reply

thanks allot
Reply

I‘ll try that now,hopefully it will work
Reply

thx
(01-12-2015, 07:39 PM)VisualBasics Wrote:
NEW VERSION 3.6.1 RELEASED


This Tutorial shows you how to use the Extreme Injector 3.6.1 by master131 properly!
It's always important to use the Extreme Injector because it has the most advanced security Injection methods around.

First off, in the Main Injection menu, we click Settings.
[Image: drjOcB8.png]

The Settings Menu should look like this:
[Image: 8DbWjPq.png]

You can click "Start in Secure Mode" to avoid Anti Cheat systems to detect the Injector itself.
What is different in secure mode?
- Random name.
- Random window title.
- Random Hash.

When it is open, close the normal injector.
Click Settings again and now we come to the part where i show you what options should be enabled.
All Important Options are marked in Bold.
But first, here are the explanations of all Security Features.

Injection Methods:
- Standard: This is the injection technique used in nearly every injector out there. It uses CreateRemoteThread and LoadLibrary and is the most reliable injection technique.
- LdrLoadDll Stub: This is similar to the Standard injection technique except it goes 1 level deeper into LoadLibrary.
- LdrpLoadDll Stub: This goes even another level deeper into LdrLoadDll. It may crash or cause errors on OSes newer than Windows 8.1 as it can change.
- Thread Hijacking: This is a pretty stable method of injection that takes over already executing code to inject your DLL and is not used by many injectors.
- Manual Map: This is the most secure injection technique. So secure that even Windows won't even know about the injected DLL. It may not work properly on OSes newer than Windows 8.1, you will be told what to do by the injector in that case.

That means, we select the Manual Map Injection Method. Also, click Advanced and select hide threads from debugger. Thread Hijacking doesn't work on XP 64 bit.
Now the Scrambling Options.

Scrambling Options:
- None: As the name implies, this means that DLL scrambling is disabled completely.
- Basic: This applies basic scrambling that should work with most DLLs.
- Standard: This applies even more scrambling options that should work with most DLLs.
- Extreme: Applies all scrambling options (the best/strongest preset) that could break some DLLs but should work with most.

That means, we select the Extreme Scrambling Method. If the extreme scrambling doesn't work or the game crashes, use the Standard Scrambling Method.
Now we come to the Injection Options.

Injection Options:
- Auto Inject could be annoying, i never use it.
- Close on Inject should be marked as it closes after Injection, this avoids that Anti cheat systems don't detected the Injector.
- Stealth Inject is very important and should be marked as it gives even more security while injecting.

That means, we select Close on Inject and Stealth Inject as Injection Methods.
Now the Post-Injection Methods.

Post-Injection Method:
These post-inject techniques are often seen within hacks to try prevent detection from anti-cheats but this injector can do it externally if the hack doesn't do it already.

- Erase PE: This erases the PE headers at the start of the injected DLL, making it hard for anti-cheats to identify that a DLL exists at a specific location.
- Hide Module: This hides the DLL from the process' module list so if an anti-cheat were to search through a process' module list, it would not appear.


Warning: Most modern anti-cheats these days can still easily detect DLLs even with these options enabled. The most secure method would be using manual map.

That means, we select Erase PE and Hide Module as Post-Injection Methods. You should also read the Info and Warning.
After all that, click OK and then Inject. Have fun hacking with security!

Here's a picture how it should look like:
[Image: tY244Gn.png]

Whats new in 3.6?
- Fixed manual map support for Windows 8.1 (for real this time)
- Updated file host for Visual C++ dependencies
- Added more aggressive dependency resolving of Microsoft DLLs (fixes SystemFunction036 in advapi32.dll)

VirusScan:


Download:

Reply

Thx! Big Grin This is going to help me alot!

(01-12-2015, 07:39 PM)VisualBasics Wrote:
NEW VERSION 3.6.1 RELEASED


This Tutorial shows you how to use the Extreme Injector 3.6.1 by master131 properly!
It's always important to use the Extreme Injector because it has the most advanced security Injection methods around.

First off, in the Main Injection menu, we click Settings.
[Image: drjOcB8.png]

The Settings Menu should look like this:
[Image: 8DbWjPq.png]

You can click "Start in Secure Mode" to avoid Anti Cheat systems to detect the Injector itself.
What is different in secure mode?
- Random name.
- Random window title.
- Random Hash.

When it is open, close the normal injector.
Click Settings again and now we come to the part where i show you what options should be enabled.
All Important Options are marked in Bold.
But first, here are the explanations of all Security Features.

Injection Methods:
- Standard: This is the injection technique used in nearly every injector out there. It uses CreateRemoteThread and LoadLibrary and is the most reliable injection technique.
- LdrLoadDll Stub: This is similar to the Standard injection technique except it goes 1 level deeper into LoadLibrary.
- LdrpLoadDll Stub: This goes even another level deeper into LdrLoadDll. It may crash or cause errors on OSes newer than Windows 8.1 as it can change.
- Thread Hijacking: This is a pretty stable method of injection that takes over already executing code to inject your DLL and is not used by many injectors.
- Manual Map: This is the most secure injection technique. So secure that even Windows won't even know about the injected DLL. It may not work properly on OSes newer than Windows 8.1, you will be told what to do by the injector in that case.

That means, we select the Manual Map Injection Method. Also, click Advanced and select hide threads from debugger. Thread Hijacking doesn't work on XP 64 bit.
Now the Scrambling Options.

Scrambling Options:
- None: As the name implies, this means that DLL scrambling is disabled completely.
- Basic: This applies basic scrambling that should work with most DLLs.
- Standard: This applies even more scrambling options that should work with most DLLs.
- Extreme: Applies all scrambling options (the best/strongest preset) that could break some DLLs but should work with most.

That means, we select the Extreme Scrambling Method. If the extreme scrambling doesn't work or the game crashes, use the Standard Scrambling Method.
Now we come to the Injection Options.

Injection Options:
- Auto Inject could be annoying, i never use it.
- Close on Inject should be marked as it closes after Injection, this avoids that Anti cheat systems don't detected the Injector.
- Stealth Inject is very important and should be marked as it gives even more security while injecting.

That means, we select Close on Inject and Stealth Inject as Injection Methods.
Now the Post-Injection Methods.

Post-Injection Method:
These post-inject techniques are often seen within hacks to try prevent detection from anti-cheats but this injector can do it externally if the hack doesn't do it already.

- Erase PE: This erases the PE headers at the start of the injected DLL, making it hard for anti-cheats to identify that a DLL exists at a specific location.
- Hide Module: This hides the DLL from the process' module list so if an anti-cheat were to search through a process' module list, it would not appear.


Warning: Most modern anti-cheats these days can still easily detect DLLs even with these options enabled. The most secure method would be using manual map.

That means, we select Erase PE and Hide Module as Post-Injection Methods. You should also read the Info and Warning.
After all that, click OK and then Inject. Have fun hacking with security!

Here's a picture how it should look like:
[Image: tY244Gn.png]

Whats new in 3.6?
- Fixed manual map support for Windows 8.1 (for real this time)
- Updated file host for Visual C++ dependencies
- Added more aggressive dependency resolving of Microsoft DLLs (fixes SystemFunction036 in advapi32.dll)

VirusScan:


Download:

(This post was last modified: 12-17-2015, 08:00 AM by LeMaxFox.)
Reply

(01-12-2015, 07:39 PM)VisualBasics Wrote:
NEW VERSION 3.6.1 RELEASED


This Tutorial shows you how to use the Extreme Injector 3.6.1 by master131 properly!
It's always important to use the Extreme Injector because it has the most advanced security Injection methods around.

First off, in the Main Injection menu, we click Settings.
[Image: drjOcB8.png]

The Settings Menu should look like this:
[Image: 8DbWjPq.png]

You can click "Start in Secure Mode" to avoid Anti Cheat systems to detect the Injector itself.
What is different in secure mode?
- Random name.
- Random window title.
- Random Hash.

When it is open, close the normal injector.
Click Settings again and now we come to the part where i show you what options should be enabled.
All Important Options are marked in Bold.
But first, here are the explanations of all Security Features.

Injection Methods:
- Standard: This is the injection technique used in nearly every injector out there. It uses CreateRemoteThread and LoadLibrary and is the most reliable injection technique.
- LdrLoadDll Stub: This is similar to the Standard injection technique except it goes 1 level deeper into LoadLibrary.
- LdrpLoadDll Stub: This goes even another level deeper into LdrLoadDll. It may crash or cause errors on OSes newer than Windows 8.1 as it can change.
- Thread Hijacking: This is a pretty stable method of injection that takes over already executing code to inject your DLL and is not used by many injectors.
- Manual Map: This is the most secure injection technique. So secure that even Windows won't even know about the injected DLL. It may not work properly on OSes newer than Windows 8.1, you will be told what to do by the injector in that case.

That means, we select the Manual Map Injection Method. Also, click Advanced and select hide threads from debugger. Thread Hijacking doesn't work on XP 64 bit.
Now the Scrambling Options.

Scrambling Options:
- None: As the name implies, this means that DLL scrambling is disabled completely.
- Basic: This applies basic scrambling that should work with most DLLs.
- Standard: This applies even more scrambling options that should work with most DLLs.
- Extreme: Applies all scrambling options (the best/strongest preset) that could break some DLLs but should work with most.

That means, we select the Extreme Scrambling Method. If the extreme scrambling doesn't work or the game crashes, use the Standard Scrambling Method.
Now we come to the Injection Options.

Injection Options:
- Auto Inject could be annoying, i never use it.
- Close on Inject should be marked as it closes after Injection, this avoids that Anti cheat systems don't detected the Injector.
- Stealth Inject is very important and should be marked as it gives even more security while injecting.

That means, we select Close on Inject and Stealth Inject as Injection Methods.
Now the Post-Injection Methods.

Post-Injection Method:
These post-inject techniques are often seen within hacks to try prevent detection from anti-cheats but this injector can do it externally if the hack doesn't do it already.

- Erase PE: This erases the PE headers at the start of the injected DLL, making it hard for anti-cheats to identify that a DLL exists at a specific location.
- Hide Module: This hides the DLL from the process' module list so if an anti-cheat were to search through a process' module list, it would not appear.


Warning: Most modern anti-cheats these days can still easily detect DLLs even with these options enabled. The most secure method would be using manual map.

That means, we select Erase PE and Hide Module as Post-Injection Methods. You should also read the Info and Warning.
After all that, click OK and then Inject. Have fun hacking with security!

Here's a picture how it should look like:
[Image: tY244Gn.png]

Whats new in 3.6?
- Fixed manual map support for Windows 8.1 (for real this time)
- Updated file host for Visual C++ dependencies
- Added more aggressive dependency resolving of Microsoft DLLs (fixes SystemFunction036 in advapi32.dll)

VirusScan:


Download:

Reply




Possibly Related Threads...
Thread Author Replies Views Last Post
Exclamation This is to new users. Mavcjs 16 8,373 06-15-2019, 04:24 AM
Last Post: Droppydeadd
  Asphix Injector . Taco . 10 1,248 02-17-2018, 06:45 PM
Last Post: ctwinss
  New skype .-. ExecGaming 1 776 06-11-2017, 12:21 AM
Last Post: JasonCrank
  Asphix Injector . Taco . 1 151 06-07-2017, 07:22 AM
Last Post: DATOBOI
  I am new! hailibis123 1 732 05-11-2017, 04:01 PM
Last Post: JasonCrank
  New to this ;) gamerzieg3211 0 611 05-05-2017, 09:32 PM
Last Post: gamerzieg3211
  Hey, new comer here. aliceneet 2 741 05-05-2017, 12:40 PM
Last Post: JasonCrank
  hyped for the new cod shawn101007 1 665 05-02-2017, 07:40 PM
Last Post: JasonCrank
  Hi, im new! KuikViperJr 1 687 05-01-2017, 10:48 PM
Last Post: JasonCrank
  New to the Community WyldFox 1 707 04-29-2017, 03:22 AM
Last Post: JasonCrank

Thread Options
Forum Jump:


Users browsing this thread:
1 Guest(s)
Mark As Read Contact Us Cracking, Gaming, Hacking - CrankGaming